PAS

The steel grades in the PAS series are low-carbon micro-alloyed steels which are thermomechanically rolled.

The low carbon and alloying element levels, the cleanness of the steels with their low sulfur content and the special rolling process result in excellent properties including good cold formability, weldability and toughness.

The plates are usually cut from hot rolled coils in thicknesses down to around 3/8”. However, thicker and wider plates of lower strength can be made by rolling on a four-high reversing mill.

PAS Steels

  • PAS 45US
  • PAS 50US
  • PAS 55US
  • PAS 60US
  • PAS 65US
  • PAS 70US
  • PAS 80US
  • PAS 85US
  • PAS 95US
  • PAS 100US

Properties

  • Minimum yield points up to 100 ksi (PAS 100US) with very good cold formability
  • Press braking and bending with very small radii
  • Notch impact energy 27 J at -40°F
  • Excellent surface quality
  • Outstanding weldability

Please note: Our PAS steels are distributed in Europe under the brand names referring to the metric system (the yield strength given in MPa). In some publications (like data sheets or brochures) only the European brand names and the corresponding values in the metric system may be listed.

US Europe
PAS 45US PAS 315
PAS 50US PAS 355
PAS 55US PAS 380
PAS 60US PAS 420
PAS 65US PAS 460
PAS 70US PAS 500
PAS 80US PAS 550
PAS 85US PAS 600
PAS 95US PAS 650
PAS 100US PAS 700

One of your most flexible workers

Information

Adobe Reader

To view the documents in PDF format you will need Adobe Reader, available free of charge..

Adobe Flash Player

Some features are displayed correctly only with the software Adobe Flash Player which is available free of charge.